Stahlwille 50184005 - MANOSKOP 730 Quick torque wrench 6-50N·m 9 x 12 mm L. 315mm

Immediate adjustment thanks to an easy-to-use clamping lever on the handle; integrated magnifying glass for better readability of the adjusted value

Characteristics

• Effective. There is no need to reset to "0", as the measuring element is only subjected to stress during the tightening process.
• Ergonomic, non-slip adjustment element with thumb cavity and optimized ball handle for fatigue-free work
• Trigger torque wrench with interchangeable insert tool housing, dual stop signal (sensible and audible), tighten to the left by reversing the insert tools
• With calibration certificate, display deviation of ± 4%
• Triggering. No need to reset to "0", as the measuring element is only charged during tightening. Socket box for interchangeable tools. Quick Release safety lock (Gr. 5-65). Quick adjustment via easy-to-use tightening lever on the handle (Gr. 5-65). Ergonomically shaped, non-slip adjusting element with thumb recess. Optimized ball handle for fatigue-free work. Double stop signal. Dual scale Nm/ft-lb or Nm/in-lb (Gr. 5-80). Also available on request as a non-dual scale Nm version (size 5-65). Tighten counterclockwise by turning the plug-in tools. Continued loading after release or loading in the opposite direction, e.g. With stuck screws, they do not act on the unlocking mechanism, which is thus protected from damage. Calibration with the perfectControl® calibration device no. 7794 or the calibration system no. 7706. If necessary, readjustment without disassembly. Certified according to DIN EN ISO 6789-2:2017. Indication deviation ±4%.
• Size: 5
• Tool holder size [inner square]: 9 x 12 mm
• Measurement range N
• m: 6-50 N
• m
• Measurement range ft
• lb: 5-36 ft
• lb
• N scale division
• m: 2 N
• m
• ft scale division
• lb: 1 ft
• lb
• Length mm (L): 315 mm
• Width mm (b): 28 mm
• Height mm (h): 23 mm
• DIN: DIN EN ISO 6789-2:2017
• LF: 288 mm
• SF: 17.5 mm
• Weight (g): 780 g
• Weight in kg: 0.78 kg