Gedore Automotive KL-1005-11 Universal Hydraulic Hub Puller for Commercial Vehicles
Gedore Automotive KL-1005-11 Universal Hydraulic Hub Puller for Commercial Vehicles
Includes 28 ton hydraulic cylinder
Suitable for hubs and hub-bearing joints of commercial vehicles with bolt patterns:
10x120, 10x122, 10x143, 10x165, 10x168, 10x225, 12x144, 12x145, 12x164, 12x168, 14x138, 14x144.
For application in trucks, tractors, semi-trailers and similar such as:
Mercedes Actros, Antos, Atego, Axor, Econlc; Neoplan;
MAN F2000, L2000, M2000L, M2000M, TGA, TGM, TGS, TGL, TGX;
Renault Magnum, Mldlum, Midlum Premium, Mildliner CE, M, ME, MS, S, SE;
DAF LF45, LFSS, LF {Euro 6);
lveco Eurocargo;
Volvo FL;
VDL Bova Omnibus, city bus;
Gigant Protec DNOKH2, Krone;
Kögel KTA;
Axes: BPW, Gigant, SAF; SAF Holland axles series SKRLB 9019 W, SKRB 10022; axles
rigid GFA; Trailer/loader Kögel, Schmitz Cargobull, Wlelton, ZF etc.
The hub remover allows for quick and professional removal of hub and hub/bearing units with removable hub cap. After removing the hub cap, the threaded holes in the hub are used to remove the hub cap. The counter-support is carried out on the shaft using the different thrust washers. The adapter plate offers universal adaptation to a large number of bolt patterns available on the market.
EXPLODED
0 - KL-0040-2800 Hydraulic cylinder 28 tons
1 - KL-0040-2812-5 M24 Compression Nut, 20.5mm
2 - KL-0040-2812-1 Pressure spindle M24 x 590 mm
3 - KL-1005-111 Basic tool set consisting of:
3.1 - KL-1005-1111 Adapter plate
3.2 - KL-1005-1112 2-¾" Extension
3.3 -KL-1005-1115 Short thrust washer
3.4 - KL-1005-1116 Thrust washer Ø48 mm
3.5 - KL-1005-1117 Thrust washer Ø58 mm
3.6 - KL-1005-1118 Thrust washer Ø68 mm
3.7 - KL-1005-1119 Thrust washer Ø78 mm
3.8 - KL-1005-1114 Intermediate cover (4 units)
3.9 - KL-1005-1113 M22x1.5 Adapters (4 units)
Dimensions
Dimensions
Length: mm
Width: mm
Height: mm