Stahlwille 96583020 - Torque wrench with disconnect mechanism

for work in mass production

Characteristics

• It is not necessary to set the trigger to "0", since the measuring element is only subjected to stress during the tightening process. Housing for interchangeable attachable tools. QuickRelease safety lock. Quick and precise adjustment via QuickSelect. Double stop indicator. Double graduation scale, easily readable with different colors for N.
• m/ft
• lb or ft
• lb/in
• lb Tighten to the left by reversing the attachable tools. Overloads acting after the trigger or loads in the opposite direction to the tightening – e.g., when forcing seized screws – have no effect on the trigger mechanism, thus preventing its deterioration. Two-component handle with ergonomic soft green zone (resistant to oils, greases, fuels, brake fluid, and skydrol hydraulic fluid). Calibration with perfectControl® calibration kit no. 7794 or calibration kit no. 7706. If necessary, readjust without removing the wrench. Certified according to DIN EN ISO 6789-2:2017. Registered design in a durable synthetic case (size 80-100 in a sheet steel case). Indication deviation ± 3%.
• Size: a/20
• Tool holder size [inner square]: 14 x 18 mm
• Measurement range ft
• lb: 30-150 ft
• lb
• Measurement range in
• lb: 350-1800 in
• lb
• ft scale division
• lb: 5 ft
• lb
• Scale division in
• lb: 100 in
• lb
• Fine graduation: 10 in
• lb
• Length mm (L): 467 mm
• Width mm (b): 28 mm
• Height mm (h): 23 mm
• DIN: DIN EN ISO 6789-2:2017
• LF: 424.5 mm
• SF: 25 mm
• Weight (g): 1066 g
• Weight with box: 2072 g
• Weight in kg: 2.07 kg