• GEDORE 1.06/HSP1 - Husillo de presión hidr. 10 t (8116100) - Ferrotecnia
1 1

GEDORE 1.06/HSP1 - Hydraulic pressure spindle 10 t (8116100)

GEDORE 1.06/HSP1 - Hydraulic pressure spindle 10 t (8116100)

638.00 лв
651.00 лв 638.00 лв
Sale Sold out
Taxes included. Shipping calculated at checkout.
  • To extract in a controlled and safe way
  • To exert pressure of 10 t, 12 to 15 t
  • The pressure piece can be replaced by a tip and if necessary extended.
  • The small pressure spindle has a safety device to prevent unintentional unscrewing. Preparation before use: 1. Before use, check that the pressure spindle has been loosened enough, so that the pressure piece is in the initial position inside the hydraulic cylinder. 2. Release the plug from the spindle body. You must first loosen the grub screw. 3. Screw the spindle body from below into the extractor bridge until the spindle protrudes about 60 mm from the bridge. 4. Screw the plug into the spindle body as far as it will go and fix the position with the grub screw. Way of use: p. e.g. HSP3 5. Place the extractor in position and tighten the spindle body with a 41mm wrench. 6. Screw the 17mm pressure spindle into the plug. The hydraulic forces will begin to operate. The travel of the pressure piece in the cylinder is max. approx. 12mm. Hydraulic extraction can be completed by rotating the spindle body with a 41mm head. 7. After use, the 17mm pressure spindle will return to the initial position and the pressure piece will return back along the hydraulic cylinder
    • SKU: 1.06/HSP1 - EAN13: 4036976104035

    Dimensions

    Length: 350.0 mm

    Width: 230.0 mm

    Height: 60.0 mm

    View full details

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)