{"title":"STAHLWILLE • Herramientas dinamométricas","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eHerramientas dinamométricas STAHLWILLE: precisión en el par de apriete con llaves electrónicas y mecánicas para un trabajo fiable.\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"stahlwille-96502065-llaves-dinamometricas-de-servicio-serie-manoskop-730dr-65-650n-m-3-4-l-977mm","title":"Stahlwille 96502065 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eTam.: II\/65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 65-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 48-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 580-5800 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 65 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Square drive outside (in.):\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 977 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 140 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 100 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 60\u003c\/li\u003e\n\n\u003cli\u003e Outside square [inches]: 3\/4\"\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/0.1 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3994 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 9000 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568098537813,"sku":"96502065","price":1837.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96502065-llave-dinamometrica-electromecanica-ferrotecnia-8369512.png?v=1773166508"},{"product_id":"stahlwille-96501965-llave-dinamometrica-manoskop-r-730d-65-650n-m-22-x-28-mm-l-892mm","title":"Stahlwille 96501965 - Electromechanical Torque Wrench","description":"\u003cp\u003eA gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable plug-in tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eTam.: II\/65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 65-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 48-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 580-5800 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 65 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 892 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/0.1 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e LF: 889 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3224 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 7500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 7.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568098767189,"sku":"96501965","price":1567.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501965-llave-dinamometrica-electromecanica-ferrotecnia-7016072.png?v=1773166150"},{"product_id":"stahlwille-96501065-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-65-650n-m-3-4-l-980mm","title":"Stahlwille 96501065 - Electromechanical torque wrench 65-650 Nm","description":"\u003cp\u003e Torque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n \u003cp\u003eTo tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n\u003cp\u003e to the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n \u003ch3\u003eCharacteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Simple documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n\u003cli\u003e Thanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the length of the inserted tool to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 65-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 48-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 580-5800 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 980 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 125 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 95 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 60\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 5137 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 9000 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 8.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568098832725,"sku":"96501065","price":2779.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501065-llave-dinamometrica-electromecanica-65-650-nm-ferrotecnia-1425224.png?v=1773166579"},{"product_id":"stahlwille-96501640-llave-dinamometrica-de-angulo-y-par-electron-sensotork-r-713r-20-400n-m-3-4-l-838mm","title":"Stahlwille 96501640 - Electromechanical torque wrench 20-400 Nm","description":"\u003cp\u003e Torque and turning angle are visible simultaneously across an extremely wide tightening angle range\u003c\/p\u003e\n\n\u003cp\u003e Deviation of the rotation angle indication ±1° ±1 digit up to 100°, \u0026gt;100° at least 1% ± 1 digit\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e simultaneous display of tightening torque and tightening angle\u003c\/li\u003e\n\n\u003cli\u003e convenient measurement of the tightening angle\u003c\/li\u003e\n\n\u003cli\u003e Size: 40\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range Nm: 20-400 Nm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ftlb: 15-296 ftlb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 838 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 50 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 31.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 60\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 750 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 25 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 2332 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 5555 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 4.8 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568098865493,"sku":"96501640","price":2326.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501640-llave-dinamometrica-electromecanica-20-400-nm-ferrotecnia-3532950.png?v=1773166283"},{"product_id":"stahlwille-96502265-llave-dinamometrica-manoskop-r-730nr-100-480ft-lb-3-4-l-944mm","title":"Stahlwille 96502265 - Torque wrench with disconnect mechanism","description":"\u003cp\u003e Deviation from the indication of ± 4%\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ein a durable synthetic material case (size 65 in a steel sheet box) deviation in the indication ± 4%\u003c\/li\u003e\n\n\u003cli\u003e Size: 65 FK-HD\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 130-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 100-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 50 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 20 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 2.5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 944 mm\u003c\/li\u003e\n\n\u003cli\u003e b1: 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e b2: 58 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h1): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h2): 36 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 848 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3698 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 6188 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 6.62 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568098898261,"sku":"96502265","price":1417.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96502265-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-4806516.png?v=1773166517"},{"product_id":"stahlwille-96503065-llave-dinamometrica-manoskop-r-730-fix-130-650n-m-14-x-18-mm-l-890mm","title":"Stahlwille 96503065 - Torque wrench with disconnect mechanism","description":"\u003cp\u003e for work in mass production\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eIt is not necessary to set the trigger to \"0\", since the measuring element is only subjected to stress during the tightening process. Housing for interchangeable attachable tools. QuickRelease safety lock. Quick and precise adjustment via QuickSelect. Double stop indicator. Double graduation scale, easily readable with different colors for N.\u003c\/li\u003e\n\n\u003cli\u003e m\/ft\u003c\/li\u003e\n\n\u003cli\u003e lb or ft\u003c\/li\u003e\n\n\u003cli\u003e lb\/in\u003c\/li\u003e\n\n   \u003cli\u003elb Tighten to the left by reversing the attachable tools. Overloads acting after the trigger or loads in the opposite direction to the tightening – e.g., when forcing seized screws – have no effect on the trigger mechanism, thus preventing its deterioration. Two-component handle with ergonomic soft green zone (resistant to oils, greases, fuels, brake fluid, and skydrol hydraulic fluid). Calibration with perfectControl® calibration kit no. 7794 or calibration kit no. 7706. If necessary, readjust without removing the wrench. Certified according to DIN EN ISO 6789-2:2017. Registered design in a durable synthetic case (size 80-100 in a sheet steel case). Indication deviation ± 3%.\u003c\/li\u003e\n\n\u003cli\u003e Size: 65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 130-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 100-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 130 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n   \u003cli\u003eNominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 50 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 20 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 2.5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 890 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 848 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 25 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3242 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 6500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 6.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568099029333,"sku":"96503065","price":1308.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96503065-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-1367597.png?v=1773166396"},{"product_id":"stahlwille-50184565-llave-dinamometrica-manoskop-730-quick-130-650n-m-22-x-28-mm-l-897mm","title":"Stahlwille 50184565 - MANOSKOP 730 Quick torque wrench 130-650N·m 22 x 28 mm L. 897mm","description":"\u003cp\u003e with shot\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eTriggering. No need to reset to \"0\", as the measuring element is only charged during tightening. Socket box for interchangeable tools. Quick Release safety lock (Gr. 5-65). Quick adjustment via easy-to-use tightening lever on the handle (Gr. 5-65). Ergonomically shaped, non-slip adjusting element with thumb recess. Optimized ball handle for fatigue-free work. Double stop signal. Dual scale Nm\/ft-lb or Nm\/in-lb (Gr. 5-80). Also available on request as a non-dual scale Nm version (size 5-65). Tighten counterclockwise by turning the plug-in tools. Continued loading after release or loading in the opposite direction, e.g. With stuck screws, they do not act on the unlocking mechanism, which is thus protected from damage. Calibration with the perfectControl® calibration device no. 7794 or the calibration system no. 7706. If necessary, readjustment without disassembly. Certified according to DIN EN ISO 6789-2:2017. Indication deviation ±4%.\u003c\/li\u003e \n\u003cli\u003eTam.: II\/65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 130-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 100-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 20 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 20 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 897 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 907 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4104 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 4.1 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568099062101,"sku":"50184565","price":977.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50184565-llave-dinamometrica-manoskop-730-quick-130-650nm-22-x-28-mm-l-897mm-ferrotecnia-6029885.png?v=1773165679"},{"product_id":"stahlwille-50200081-llave-dinamometrica-721nf-160-800n-m-3-4-l-1050-5mm","title":"Stahlwille 50200081 - Torque wrench 721Nf 160-800N·m 3\/4\" L. 1050.5mm","description":"\u003cp\u003e 160-800 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e 160-800 Nm 3\/4\" square male For general maintenance.\u003c\/li\u003e\n\n\u003cli\u003e Size: 80\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 160-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 120-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 160 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 20 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 20 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1050.5 mm\u003c\/li\u003e\n\n\u003cli\u003e L1:\u003c\/li\u003e\n\n\u003cli\u003e mm\u003c\/li\u003e\n\n\u003cli\u003e b1: 46.5 mm\u003c\/li\u003e\n\n\u003cli\u003e b2: 76 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 42 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 938 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 6380 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 7.1 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568099291477,"sku":"50200081","price":1757.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50200081-llave-dinamometrica-721nf-160-800nm-34-l-10505mm-ferrotecnia-1446619.png?v=1773166220"},{"product_id":"stahlwille-50181080-llave-dinamometrica-manoskop-730n-160-800n-m-22-x-28-mm-l-1178mm","title":"Stahlwille 50181080 - MANOSKOP 730N Torque Wrench 160-800N·m 22 x 28 mm L. 1178mm","description":"\u003cp\u003e Housing for interchangeable insertion tools\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e housing for interchangeable snap-on tools, QuickRelease safety lock, tighten to the left by reversing the snap-on tools, deviation in indication ± 3% (size 2, a\/2 ± 4%)\u003c\/li\u003e\n\n\u003cli\u003e Size: 80\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 160-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 120-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 160 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 25 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1178 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 1167 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4825 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 4.83 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568099389781,"sku":"50181080","price":1419.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50181080-llave-dinamometrica-manoskop-730n-160-800nm-22-x-28-mm-l-1178mm-ferrotecnia-9086457.png?v=1773166104"},{"product_id":"stahlwille-96503080-llave-dinamometrica-manoskop-r-730-fix-160-800n-m-22-x-28-mm-l-1178mm","title":"Stahlwille 96503080 - Torque wrench with disconnect mechanism","description":"\u003cp\u003efor work in mass production\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e It is not necessary to set the trigger to \"0\", since the measuring element is only subjected to stress during the tightening process. Housing for interchangeable attachable tools. QuickRelease safety lock. Quick and precise adjustment via QuickSelect. Double stop indicator. Double graduation scale, easily readable with different colors for N.\u003c\/li\u003e\n\n\u003cli\u003e m\/ft\u003c\/li\u003e\n\n\u003cli\u003e lb or ft\u003c\/li\u003e\n\n\u003cli\u003e lb\/in\u003c\/li\u003e\n\n   \u003cli\u003elb Tighten to the left by reversing the attachable tools. Overloads acting after the trigger or loads in the opposite direction to the tightening – e.g., when forcing seized screws – have no effect on the trigger mechanism, thus preventing its deterioration. Two-component handle with ergonomic soft green zone (resistant to oils, greases, fuels, brake fluid, and skydrol hydraulic fluid). Calibration with perfectControl® calibration kit no. 7794 or calibration kit no. 7706. If necessary, readjust without removing the wrench. Certified according to DIN EN ISO 6789-2:2017. Registered design in a durable synthetic case (size 80-100 in a sheet steel case). Indication deviation ± 3%.\u003c\/li\u003e\n\n\u003cli\u003e Size: 80\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 160-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 120-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 160 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n   \u003cli\u003eNominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 25 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1178 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 1167 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4794 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 10500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 10.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568100471125,"sku":"96503080","price":1723.3,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96503080-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-5763538.png?v=1773165728"},{"product_id":"stahlwille-96501800-llaves-dinamometricas-de-servicio-serie-manoskop-730dr-100-1000n-m-3-4-l-1439mm","title":"Stahlwille 96501800 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eSize: 100\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 100-1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 74-750 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 900-9000 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Square drive outside (in.):\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1439 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 120 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 100 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 30\u003c\/li\u003e\n\n\u003cli\u003e Outside square [inches]: 3\/4\"\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/0.1 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 6910 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 12500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 12.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568100503893,"sku":"96501800","price":3180.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501800-llave-dinamometrica-electromecanica-ferrotecnia-4823793.png?v=1773165915"},{"product_id":"stahlwille-96501880-llaves-dinamometricas-de-servicio-serie-manoskop-730dr-80-800n-m-3-4-l-1255mm","title":"Stahlwille 96501880 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eSize: 80\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 80-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 60-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 720-7200 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 80 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Square drive outside (in.):\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1255 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 120 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 90 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 30\u003c\/li\u003e\n\n\u003cli\u003e Outside square [inches]: 3\/4\"\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/0.1 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 6492 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 12500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 11.79 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568100602197,"sku":"96501880","price":2704.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501880-llave-dinamometrica-electromecanica-ferrotecnia-9724641.png?v=1773165668"},{"product_id":"stahlwille-96501100-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-100-1000n-m-3-4-l-1438mm","title":"Stahlwille 96501100 - Electromechanical Torque Wrench 100-1000 N","description":"\u003cp\u003eTorque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n\u003cp\u003e To tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n \u003cp\u003eto the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Simple documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n   \u003cli\u003eThanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the length of the inserted tool to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 100\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 100-1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 73-735 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 885-8850 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1438 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 130 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 100 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 30\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 6905 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 12500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 12.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568100995413,"sku":"96501100","price":3535.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501100-llave-dinamometrica-electromecanica-100-1000-n-ferrotecnia-5058109.png?v=1773166281"},{"product_id":"stahlwille-96500100-llave-dinamometrica-de-angulo-y-par-manoskop-r-714-100-1000n-m-22-x-28-mm-l-1343mm","title":"Stahlwille 96500100 - Electromechanical torque wrench 100-1000 N","description":"\u003cp\u003e 4 measurement modes (tightening torque, tightening angle, tightening torque with tightening angle control magnitude, tightening angle with tightening torque control magnitude)\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 400\u003c\/p\u003e\n\n\u003cp\u003e N\u003c\/p\u003e\n\n\u003cp\u003e N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Easy documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n\u003cli\u003e Thanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003e4 measurement modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) High-resolution color OLED display and side indicator lights Visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) Configurable display structure Quarter-turn locking battery cover Optional: lithium-ion battery no. 7195-2 and charger no. 71603 operating modes: click (patented electromechanical trigger), peak hold (peak value display mode) and tracking (real-time value display mode) Micro USB interface for data communication Optional Bluetooth Low Energy module (5.2) QuickRelease safety lock: insertable tool change system Data storage of up to 2500 Tightening, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 different sequences; adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of overload of the torque wrench and forced firing in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and turning angle) to reduce human error; units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n   \u003cli\u003eAutomatic compensation for inserted tool length: the inserted tool length can be entered to ensure the required target value is correctly achieved by compensating for lever extension. Ready for retightening immediately after releasing the previous screw. Clockwise and counterclockwise tightening: the inserted tool must be turned around to apply the counterclockwise tightening torque in \"trigger\" mode. Visual, acoustic, and tactile activation signal. Tightening torque and turning angle visible simultaneously. Correct measurement regardless of the force application point (for sizes 1, 2, and 4). Safe handling thanks to the ergonomic two-component handle (resistant to most common oils, greases, fuels, brake fluids, and Skydrol). Three certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2). Robust plastic case (sizes 40-100 in sheet metal case). (steel) registered design, patented with SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 V; rotation angle indication resolution 0.1°; rotation angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/li\u003e \n\u003cli\u003em: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 1\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 100\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 100-1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 74-750 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 900-9000 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1343 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 1343 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4990 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 10500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 10.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568101028181,"sku":"96500100","price":2947.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96500100-llave-dinamometrica-electromecanica-100-1000-n-ferrotecnia-7774219.png?v=1773165732"},{"product_id":"stahlwille-50584002-llave-dinamometrica-manoskop-730a-quick-30-175in-lb-9-x-12-mm-l-179mm","title":"Stahlwille 50584002 - MANOSKOP 730a Quick torque wrench 30-175in lb 9 x 12 mm L. 179mm","description":"\u003cp\u003e with shot\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eTrigger; Socket for interchangeable plug-in tools; Quick Release safety lock; Flash adjustment via easy-to-operate clamping lever on the handle; Ergonomic shape, ergonomically shaped, non-slip adjustment element with thumb notch; Spherical handle optimized for fatigue-free work; Double stop signal; No need to reset to \"0\" as the measuring element is only charged during the tightening process; Tighten with the left hand by rotating the plug-in tools; Continued charging after release or charging in the opposite direction to the functional direction, e.g., in the case of stuck screws; e.g., with stuck screws, does not affect the release mechanism, which is thus protected from damage; Calibration with perfectControl calibration device no. 7794 or calibration system no. 7706. If necessary, readjustment without disassembly; With certificate; Deviation indication ± 4%.\u003c\/li\u003e\n\n\u003cli\u003e Size: a\/2\u003c\/li\u003e\n\n   \u003cli\u003eTool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 30-175 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Scale division in\u003c\/li\u003e\n\n\u003cli\u003e lb: 5 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 179 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 27.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 23.6 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 157.2 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 17.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 315 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.32 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568101126485,"sku":"50584002","price":401.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50584002-llave-dinamometrica-manoskop-730a-quick-30-175in-lb-9-x-12-mm-l-179mm-ferrotecnia-1897870.png?v=1773166348"},{"product_id":"stahlwille-96504005-llaves-dinamometricas-730r-quick-6-50n-m-3-8-l-380mm","title":"Stahlwille 96504005 - Torque wrench with disconnect mechanism","description":"\u003cp\u003e 6-50 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n   \u003cli\u003eZeroing is not necessary, as the measuring element is only charged during the tightening process. Socket for interchangeable plug-in tools. QuickRelease safety lock. Screwdriver adjustment via an easy-to-use tightening lever on the handle. Ergonomic shape, non-slip adjustment element with thumb groove. Ball handle optimized for fatigue-free work. Dual stop signal. Dual scale Nm\/ft-lb vs. Nm\/in-lb. Also available upon request as a non-dual scale Nm version. Tightening to the left by rotating plug-in tools. Continued charging after release or charging against the functional direction, e.g. With stuck screws, do not operate the unlocking mechanism, which is thus protected from damage. Calibration with the perfectControl® calibration device no. 7794 or with the calibration system no. 7706. If necessary, readjust without disassembly. Certified according to DIN EN ISO 6789-2:2017. Display deviation ± 4%.\u003c\/li\u003e \n\u003cli\u003eSize: 5\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 6-50 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 5-36 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 2 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/8\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 380 mm\u003c\/li\u003e\n\n\u003cli\u003e b1: 50 mm\u003c\/li\u003e\n\n\u003cli\u003e b2: 33 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 50 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 288 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 17.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 994 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.99 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568105845077,"sku":"96504005","price":470.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96504005-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-9999233.png?v=1773166276"},{"product_id":"stahlwille-50021003-llave-dinamometrica-750nr-20-100n-m-3-8-l-443mm","title":"Stahlwille 50021003 - Torque wrench 750NR 20-100N·m 3\/8\" L. 443mm","description":"\u003cp\u003e The reliable and low-maintenance 750NR is always ready for use, ideal for the manufacturing industry or industry professionals.\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e When it fires, a loud haptic and acoustic \"click\" is generated (double stop signal).\u003c\/li\u003e\n\n\u003cli\u003e The adjustment and fixing of the desired tightening torque is carried out quickly, easily and precisely by means of a rotary knob located at the end of the handle (1 turn = 5 N\u003c\/li\u003e\n\n\u003cli\u003e m).\u003c\/li\u003e\n\n\u003cli\u003e The easy-to-read double scale (N\u003c\/li\u003e\n\n\u003cli\u003e m\/lb\u003c\/li\u003e\n\n\u003cli\u003e ft) with additional fine scale prevents reading errors during tightening torque adjustment.\u003c\/li\u003e\n\n\u003cli\u003e The SevenFiveZero fits perfectly in the hand and allows you to work safely and comfortably.\u003c\/li\u003e\n\n   \u003cli\u003eTouchscreen with dual stop signal, fixed-mounted reversible fine-tooth ratchet, 60 teeth, robust and durable spring mechanism, fast and precise adjustment with QuickSelect for controlled clockwise tightening, load-insensitive trigger mechanism, continuous release after triggering and loosening of already tightened joints (up to the maximum limit of the torque wrench range), prescribed torque lock, dual N scale\u003c\/li\u003e\n\n\u003cli\u003e m\/ft\u003c\/li\u003e\n\n\u003cli\u003e Ready for retightening immediately after releasing the previous screw; with 2-component handle; calibration certificate according to DIN EN ISO 6789-2:2017; max. measurement error ± 4%\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 20-100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 15-74 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 20 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 10 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 0.25 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/8\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 443 mm\u003c\/li\u003e\n\n\u003cli\u003e b1: 28 mm\u003c\/li\u003e\n\n\u003cli\u003e b2: 35 mm\u003c\/li\u003e\n\n   \u003cli\u003eHeight mm (h1): 23 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h2): 14 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 348 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 1150 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 1.15 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568110039381,"sku":"50021003","price":296.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50021003-llave-dinamometrica-750nr-20-100nm-38-l-443mm-ferrotecnia-2481950.png?v=1773166098"},{"product_id":"stahlwille-96501004-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-4-40n-m-1-4-l-295mm","title":"Stahlwille 96501004 - Electromechanical torque wrench 4-40 N·m","description":"\u003cp\u003eTorque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n\u003cp\u003e To tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n \u003cp\u003eto the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Simple documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n   \u003cli\u003eThanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the length of the inserted tool to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 4\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 4-40 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 3-30 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 36-360 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 1\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 295 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 80 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 22\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 482 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 907 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.99 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568112496981,"sku":"96501004","price":1938.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501004-llave-dinamometrica-electromecanica-4-40-nm-ferrotecnia-2805270.png?v=1773166397"},{"product_id":"stahlwille-96501006-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-6-60n-m-3-8-l-427mm","title":"Stahlwille 96501006 - Electromechanical torque wrench 6-60 N·m","description":"\u003cp\u003eTorque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n\u003cp\u003e To tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n \u003cp\u003eto the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Easy documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n   \u003cli\u003eThanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the inserted tool length to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 6\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 6-60 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 4.5-45 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 54-540 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/8\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 427 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 80 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 60\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 965 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 1390 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 1.55 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568112824661,"sku":"96501006","price":1939.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501006-llave-dinamometrica-electromecanica-6-60-nm-ferrotecnia-5584956.png?v=1773166283"},{"product_id":"stahlwille-96501001-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-1-10n-m-1-4-l-269mm","title":"Stahlwille 96501001 - Electromechanical torque wrench 1-10 N·m","description":"\u003cp\u003e Torque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n\u003cp\u003e To tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n \u003cp\u003eto the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Simple documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n   \u003cli\u003eThanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the length of the inserted tool to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 1\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 1-10 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 0.7-7.5 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 9-90 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 1\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 269 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 80 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 22\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 432 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 857 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.95 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568112857429,"sku":"96501001","price":1843.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501001-llave-dinamometrica-electromecanica-1-10-nm-ferrotecnia-6519559.png?v=1773166629"},{"product_id":"stahlwille-96501002-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-2-20n-m-1-4-l-269mm","title":"Stahlwille 96501002 - Electromechanical torque wrench 2-20 N·m","description":"\u003cp\u003eTorque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n\u003cp\u003e To tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n \u003cp\u003eto the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Simple documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n   \u003cli\u003eThanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the length of the inserted tool to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 2\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 2-20 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.5-15 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 18-180 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 1\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 269 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 80 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 22\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 442 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 867 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 1.03 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568112922965,"sku":"96501002","price":1843.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501002-llave-dinamometrica-electromecanica-2-20-nm-ferrotecnia-6797321.png?v=1773166158"},{"product_id":"stahlwille-96583010-llave-dinamometrica-manoskop-730a-fix-180-900in-lb-9-x-12-mm-l-386mm","title":"Stahlwille 96583010 - Torque wrench with disconnect mechanism","description":"\u003cp\u003e for work in mass production\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e It is not necessary to set the trigger to \"0\", since the measuring element is only subjected to stress during the tightening process. Housing for interchangeable attachable tools. QuickRelease safety lock. Quick and precise adjustment via QuickSelect. Double stop indicator. Double graduation scale, easily readable with different colors for N.\u003c\/li\u003e\n\n\u003cli\u003e m\/ft\u003c\/li\u003e\n\n\u003cli\u003e lb or ft\u003c\/li\u003e\n\n\u003cli\u003e lb\/in\u003c\/li\u003e\n\n   \u003cli\u003elb Tighten to the left by reversing the attachable tools. Overloads acting after the trigger or loads in the opposite direction to the tightening – e.g., when forcing seized screws – have no effect on the trigger mechanism, thus preventing its deterioration. Two-component handle with ergonomic soft green zone (resistant to oils, greases, fuels, brake fluid, and skydrol hydraulic fluid). Calibration with perfectControl® calibration kit no. 7794 or calibration kit no. 7706. If necessary, readjust without removing the wrench. Certified according to DIN EN ISO 6789-2:2017. Registered design in a durable synthetic case (size 80-100 in a sheet steel case). Indication deviation ± 3%.\u003c\/li\u003e\n\n\u003cli\u003e Size: a\/10\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 15-75 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 180-900 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n   \u003cli\u003eft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 2.5 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Scale division in\u003c\/li\u003e\n\n\u003cli\u003e lb: 100 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 5 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 386 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 23 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 336 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 17.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 988 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 1790 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 1.79 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568113021269,"sku":"96583010","price":574.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96583010-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-6142900.png?v=1773166221"},{"product_id":"stahlwille-50021004-llave-dinamometrica-750nr-40-200n-m-1-2-l-526-7mm","title":"Stahlwille 50021004 - Torque wrench 750NR 40-200N·m 1\/2\" L. 526.7mm","description":"\u003cp\u003e The reliable and low-maintenance 750NR is always ready for use, ideal for the manufacturing industry or industry professionals.\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e When it fires, a loud haptic and acoustic \"click\" is generated (double stop signal).\u003c\/li\u003e\n\n\u003cli\u003e The adjustment and fixing of the desired tightening torque is carried out quickly, easily and precisely by means of a rotary knob located at the end of the handle (1 turn = 10 N\u003c\/li\u003e\n\n\u003cli\u003e m).\u003c\/li\u003e\n\n\u003cli\u003e The easy-to-read double scale (N\u003c\/li\u003e\n\n\u003cli\u003e m\/lb\u003c\/li\u003e\n\n\u003cli\u003e ft) with additional fine scale prevents reading errors during tightening torque adjustment.\u003c\/li\u003e\n\n\u003cli\u003e The SevenFiveZero fits perfectly in the hand and allows you to work safely and comfortably.\u003c\/li\u003e\n\n   \u003cli\u003eTouchscreen with dual stop signal, fixed-mounted reversible fine-tooth ratchet, 60 teeth, robust and durable spring mechanism, fast and precise adjustment with QuickSelect for controlled clockwise tightening, load-insensitive trigger mechanism, continuous release after triggering and loosening of already tightened joints (up to the maximum limit of the torque wrench range), prescribed torque lock, dual N scale\u003c\/li\u003e\n\n\u003cli\u003e m\/ft\u003c\/li\u003e\n\n\u003cli\u003e Ready for retightening immediately after releasing the previous screw; with 2-component handle; calibration certificate according to DIN EN ISO 6789-2:2017; max. measurement error ± 4%\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 40-200 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 30-150 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 40 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 200 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 10 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 20 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 0.5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 1\/2\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 526.7 mm\u003c\/li\u003e\n\n\u003cli\u003e b1: 28 mm\u003c\/li\u003e\n\n\u003cli\u003e b2: 43 mm\u003c\/li\u003e\n\n   \u003cli\u003eHeight mm (h1): 23 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h2): 16 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 464 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 1460 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 1.46 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568113643861,"sku":"50021004","price":318.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50021004-llave-dinamometrica-750nr-40-200nm-12-l-5267mm-ferrotecnia-1987681.png?v=1773166460"},{"product_id":"stahlwille-96504030-llaves-dinamometricas-730r-quick-60-300n-m-1-2-l-590mm","title":"Stahlwille 96504030 - Torque wrench with disconnect mechanism","description":"\u003cp\u003e with shot\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eZeroing is not necessary, as the measuring element is only charged during the tightening process. Socket for interchangeable plug-in tools. QuickRelease safety lock. Screwdriver adjustment via an easy-to-use tightening lever on the handle. Ergonomic shape, non-slip adjustment element with thumb groove. Ball handle optimized for fatigue-free work. Dual stop signal. Dual scale Nm\/ft-lb vs. Nm\/in-lb. Also available upon request as a non-dual scale Nm version. Tightening to the left by rotating plug-in tools. Continued charging after release or charging against the functional direction, e.g. With stuck screws, do not operate the unlocking mechanism, which is thus protected from damage. Calibration with the perfectControl® calibration device no. 7794 or with the calibration system no. 7706. If necessary, readjust without disassembly. Certified according to DIN EN ISO 6789-2:2017. Display deviation ± 4%.\u003c\/li\u003e \n\u003cli\u003eSize: 30\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 60-300 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 50-220 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 10 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 1\/2\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 590 mm\u003c\/li\u003e\n\n\u003cli\u003e b1: 50 mm\u003c\/li\u003e\n\n\u003cli\u003e b2: 43 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 50 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 500 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 25 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 1400 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 1.83 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568114135381,"sku":"96504030","price":602.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96504030-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-6249484.png?v=1773166568"},{"product_id":"stahlwille-50184030-llave-dinamometrica-manoskop-730-quick-60-300n-m-14-x-18-mm-l-520mm","title":"Stahlwille 50184030 - MANOSKOP 730 Quick Torque Wrench 60-300N·m 14 x 18 mm L. 520mm","description":"\u003cp\u003e with shot\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eTriggering. No need to reset to \"0\", as the measuring element is only charged during tightening. Socket box for interchangeable tools. Quick Release safety lock (Gr. 5-65). Quick adjustment via easy-to-use tightening lever on the handle (Gr. 5-65). Ergonomically shaped, non-slip adjusting element with thumb recess. Optimized ball handle for fatigue-free work. Double stop signal. Dual scale Nm\/ft-lb or Nm\/in-lb (Gr. 5-80). Also available on request as a non-dual scale Nm version (size 5-65). Tighten counterclockwise by turning the plug-in tools. Continued loading after release or loading in the opposite direction, e.g. With stuck screws, they do not act on the unlocking mechanism, which is thus protected from damage. Calibration with the perfectControl® calibration device no. 7794 or the calibration system no. 7706. If necessary, readjustment without disassembly. Certified according to DIN EN ISO 6789-2:2017. Indication deviation ±4%.\u003c\/li\u003e \n\u003cli\u003eSize: 30\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 60-300 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 50-220 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 10 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 10 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 520 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 23 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 500 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 25 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 1400 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 1.52 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568114266453,"sku":"50184030","price":488.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50184030-llave-dinamometrica-manoskop-730-quick-60-300nm-14-x-18-mm-l-520mm-ferrotecnia-5761127.png?v=1773165555"},{"product_id":"stahlwille-96502053-juego-de-llaves-dinamometricas-modelo-730r-40-32-quick-32-pzs","title":"Stahlwille 96502053 - Torque Wrench Set","description":"\u003cp\u003e in a steel case\u003c\/p\u003e\n\n\u003cp\u003e 1 #ü\u003c\/p\u003e\n\n\u003cp\u003e Service-MANOSKOP® no. 730\/40 Quick, 80-400 N\u003c\/p\u003e\n\n\u003cp\u003e 1 #ü\u003c\/p\u003e\n\n\u003cp\u003e Attachable ratchet no. 735\/20, reversible, 1\/2\" drive #D\u003c\/p\u003e\n\n\u003cp\u003e #either\u003c\/p\u003e\n\n\u003cp\u003e 1 #ü\u003c\/p\u003e\n\n \u003cp\u003eSquare drive adapter tool no. 734\/20, 1\/2\" drive #D\u003c\/p\u003e\n\n\u003cp\u003e #either\u003c\/p\u003e\n\n\u003cp\u003e 7 #ü\u003c\/p\u003e\n\n\u003cp\u003e Attachable fixed jaw tools no. 731\/40: 13\u003c\/p\u003e\n\n\u003cp\u003e 15\u003c\/p\u003e\n\n\u003cp\u003e 17\u003c\/p\u003e\n\n\u003cp\u003e 19\u003c\/p\u003e\n\n\u003cp\u003e 22\u003c\/p\u003e\n\n\u003cp\u003e 27\u003c\/p\u003e\n\n\u003cp\u003e 30 mm #ö\u003c\/p\u003e\n\n\u003cp\u003e 1 #ü\u003c\/p\u003e\n\n\u003cp\u003e Attachable tool no. 3731\/40, 24 mm #ö\u003c\/p\u003e\n\n\u003cp\u003e 7 #ü\u003c\/p\u003e\n\n\u003cp\u003e star-mouth coupling tool no. 732\/40: 13\u003c\/p\u003e\n\n\u003cp\u003e 15\u003c\/p\u003e\n\n\u003cp\u003e 17\u003c\/p\u003e\n\n\u003cp\u003e 19\u003c\/p\u003e\n\n\u003cp\u003e 22\u003c\/p\u003e\n\n\u003cp\u003e 24\u003c\/p\u003e\n\n\u003cp\u003e 27 mm 10 #ü\u003c\/p\u003e\n\n\u003cp\u003e 14\u003c\/p\u003e\n\n\u003cp\u003e 15\u003c\/p\u003e\n\n\u003cp\u003e 17\u003c\/p\u003e\n\n\u003cp\u003e 19\u003c\/p\u003e\n\n\u003cp\u003e 22\u003c\/p\u003e\n\n\u003cp\u003e 24\u003c\/p\u003e\n\n\u003cp\u003e 27\u003c\/p\u003e\n\n\u003cp\u003e 30\u003c\/p\u003e\n\n\u003cp\u003e 32 mm #ö\u003c\/p\u003e\n\n\u003cp\u003e #-\u003c\/p\u003e\n\n\u003cp\u003e 1 cross handle no. 506 #-\u003c\/p\u003e\n\n\u003cp\u003e 1 extension no. 509\/10, 225 mm #-\u003c\/p\u003e\n\n\u003cp\u003e 1 extension no. 509\/5, 130 mm #-\u003c\/p\u003e\n\n\u003cp\u003e 1 extension no. 509\/2, 55 mm\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e in metal box for general maintenance. Contents: 32 pieces: #ö\u003c\/li\u003e\n\n\u003cli\u003e m #ö\u003c\/li\u003e\n\n\u003cli\u003e 12-sided mouths no. 50: 13\u003c\/li\u003e\n\n\u003cli\u003e 4 tools: 1\/2\" #a drive\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 80-400 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 60-300 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 10 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 10 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 640 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 240 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 60 mm\u003c\/li\u003e\n\n\u003cli\u003e Type: Mercedes-Benz\u003c\/li\u003e\n\n\u003cli\u003e Number of tools: 32 pcs.\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 9739 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 9.74 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568114757973,"sku":"96502053","price":2112.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96502053-juego-de-llaves-dinamometricas-ferrotecnia-6115465.png?v=1773165730"},{"product_id":"stahlwille-96501020-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-20-200n-m-1-2-l-594mm","title":"Stahlwille 96501020 - Electromechanical torque wrench 20-200 Nm","description":"\u003cp\u003eTorque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n\u003cp\u003e To tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n \u003cp\u003eto the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Easy documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n   \u003cli\u003eThanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the length of the inserted tool to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 20\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 20-200 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 15-150 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 180-1800 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 1\/2\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 594 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 80 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 60\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 1663 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 2198 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 2.23 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568114823509,"sku":"96501020","price":2048.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501020-llave-dinamometrica-electromecanica-20-200-nm-ferrotecnia-6118385.png?v=1773165668"},{"product_id":"stahlwille-96501010-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-10-100n-m-1-2-l-500mm","title":"Stahlwille 96501010 - Electromechanical torque wrench 10-100 Nm","description":"\u003cp\u003e Torque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n\u003cp\u003e To tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n \u003cp\u003eto the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Simple documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n   \u003cli\u003eThanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the length of the inserted tool to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 10\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 10-100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 7.4-75 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 90-900 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 1\/2\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 500 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 80 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 60\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 1232 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 1657 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 1.8 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568115020117,"sku":"96501010","price":2022.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501010-llave-dinamometrica-electromecanica-10-100-nm-ferrotecnia-3833732.png?v=1773165918"},{"product_id":"stahlwille-96502001-llave-dinamometrica-721nf-200-1000n-m-3-4-l-820mm","title":"Stahlwille 96502001 - Torque wrench with disconnect mechanism","description":"\u003cp\u003e 200-1000 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n   \u003cli\u003e160-800 Nm 3\/4\" square male For general maintenance.\u003c\/li\u003e\n\n\u003cli\u003e Size: 100\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 200-1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 150-725 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 200 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 25 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 25 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 820 mm\u003c\/li\u003e\n\n\u003cli\u003e L1: 1503.5 mm\u003c\/li\u003e\n\n\u003cli\u003e b1: 46.5 mm\u003c\/li\u003e\n\n\u003cli\u003e b2: 76 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 42 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 1365.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 7010 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 8 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568117608789,"sku":"96502001","price":2017.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96502001-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-8509435.png?v=1773166276"},{"product_id":"stahlwille-50180080-llave-dinamometrica-manoskop-r-730-80-160-800n-m-l-970mm","title":"Stahlwille 50180080 - MANOSKOP® 730\/80 160-800N·m Torque Wrench L. 970mm","description":"\u003cp\u003eWith insertable adapter no. 7370\/80, all 14 x 18 mm attachable tools can also be used (max. 650 N).\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e m)\u003c\/li\u003e\n\n\u003cli\u003e With snap-on adapter no. 7370\/80, all 14 x 18 mm snap-on tools can also be used (max. 650 N).\u003c\/li\u003e\n\n\u003cli\u003e m) Supply in textile bag\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 160-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 120-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 20 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 20 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e External outlet square (mm): 24.5 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 970 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 46 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 43 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 990 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 95 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4925 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 4.93 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568133927253,"sku":"50180080","price":1362.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50180080-llave-dinamometrica-manoskop-73080-160-800nm-l-970mm-ferrotecnia-5649452.png?v=1773165316"},{"product_id":"stahlwille-96500965-llave-dinamometrica-de-angulo-y-par-manoskop-r-714-65-650n-m-22-x-28-mm-l-890mm","title":"Stahlwille 96500965 - Electromechanical torque wrench 65-650 Nm","description":"\u003cp\u003e 4 measurement modes (tightening torque, tightening angle, tightening torque with tightening angle control magnitude, tightening angle with tightening torque control magnitude)\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 400\u003c\/p\u003e\n\n\u003cp\u003e N\u003c\/p\u003e\n\n\u003cp\u003e N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n   \u003cli\u003eSimple documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n\u003cli\u003e Thanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003e4 measurement modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) High-resolution color OLED display and side indicator lights Visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) Configurable display structure Quarter-turn locking battery cover Optional: lithium-ion battery no. 7195-2 and charger no. 71603 operating modes: click (patented electromechanical trigger), peak hold (peak value display mode) and tracking (real-time value display mode) Micro USB interface for data communication Optional Bluetooth Low Energy module (5.2) QuickRelease safety lock: insertable tool change system Data storage of up to 2500 Tightening, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 different sequences; adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of overload of the torque wrench and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and turning angle) to reduce human error; units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n   \u003cli\u003eAutomatic compensation for inserted tool length: the inserted tool length can be entered to ensure the required target value is correctly achieved by compensating for lever extension. Ready for retightening immediately after releasing the previous screw. Clockwise and counterclockwise tightening: the inserted tool must be turned around to apply the counterclockwise tightening torque in \"trigger\" mode. Visual, acoustic, and tactile activation signal. Tightening torque and turning angle visible simultaneously. Correct measurement regardless of the force application point (for sizes 1, 2, and 4). Safe handling thanks to the ergonomic two-component handle (resistant to most common oils, greases, fuels, brake fluids, and Skydrol). Three certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2). Robust plastic case (sizes 40-100 in sheet metal case). (steel) registered design, patented with SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 V; rotation angle indication resolution 0.1°; rotation angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/li\u003e \n\u003cli\u003em: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 1\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 65-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 48-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 580-5800 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 890 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 890 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3222 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 7000 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 7 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568134517077,"sku":"96500965","price":2505.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96500965-llave-dinamometrica-electromecanica-65-650-nm-ferrotecnia-7162237.png?v=1773166516"},{"product_id":"stahlwille-50190081-llave-dinamometrica-720nf-80-160-800n-m-3-4-l-1034mm","title":"Stahlwille 50190081 - Torque Wrench 720NF\/80 160-800N·m 3\/4\" L. 1034mm","description":"\u003cp\u003e 160-800 N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e 160-800 Nm 3\/4\" square male.\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 160-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 120-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 160 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 20 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 20 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1034 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 45 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 42 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 938 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 5650 g\u003c\/li\u003e\n\n   \u003cli\u003eWeight in kg: 5.65 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568134549845,"sku":"50190081","price":1342.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50190081-llave-dinamometrica-720nf80-160-800nm-34-l-1034mm-ferrotecnia-1087057.png?v=1773165384"},{"product_id":"stahlwille-96501865-llaves-dinamometricas-de-servicio-serie-manoskop-730dr-65-650n-m-3-4-l-975mm","title":"Stahlwille 96501865 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eSize: 65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 65-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 48-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 580-5800 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 65 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Square drive outside (in.):\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 975 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 85 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 60\u003c\/li\u003e\n\n\u003cli\u003e Outside square [inches]: 3\/4\"\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/0.1 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3767 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 6530 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 6.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568134615381,"sku":"96501865","price":1498.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501865-llave-dinamometrica-electromecanica-ferrotecnia-9930834.png?v=1773165916"},{"product_id":"stahlwille-96503465-llave-dinamometrica-manoskop-r-730-fix-130-650n-m-22-x-28-mm-l-911mm","title":"Stahlwille 96503465 - Torque wrench with disconnect mechanism","description":"\u003cp\u003e for work in mass production\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eIt is not necessary to set the trigger to \"0\", since the measuring element is only subjected to stress during the tightening process. Housing for interchangeable attachable tools. QuickRelease safety lock. Quick and precise adjustment via QuickSelect. Double stop indicator. Double graduation scale, easily readable with different colors for N.\u003c\/li\u003e\n\n\u003cli\u003e m\/ft\u003c\/li\u003e\n\n\u003cli\u003e lb or ft\u003c\/li\u003e\n\n\u003cli\u003e lb\/in\u003c\/li\u003e\n\n   \u003cli\u003elb Tighten to the left by reversing the attachable tools. Overloads acting after the trigger or loads in the opposite direction to the tightening – e.g., when forcing seized screws – have no effect on the trigger mechanism, thus preventing its deterioration. Two-component handle with ergonomic soft green zone (resistant to oils, greases, fuels, brake fluid, and skydrol hydraulic fluid). Calibration with perfectControl® calibration kit no. 7794 or calibration kit no. 7706. If necessary, readjust without removing the wrench. Certified according to DIN EN ISO 6789-2:2017. Registered design in a durable synthetic case (size 80-100 in a sheet steel case). Indication deviation ± 3%.\u003c\/li\u003e\n\n\u003cli\u003e Tam.: II\/65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 130-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 100-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 130 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e \n\u003cli\u003eNominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 50 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 20 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 2.5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 911 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 900 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3490 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 7000 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 6.36 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568134648149,"sku":"96503465","price":1348.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96503465-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-2953253.png?v=1773165613"},{"product_id":"stahlwille-96501840-llaves-dinamometricas-de-servicio-serie-manoskop-730dr-40-400n-m-3-4-l-738mm","title":"Stahlwille 96501840 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eSize: 40\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 40-400 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 30-300 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 360-3600 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 40 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 400 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Square drive outside (in.):\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 738 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 83 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 60\u003c\/li\u003e\n\n\u003cli\u003e Outside square [inches]: 3\/4\"\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/0.1 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 2232 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 4722 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568135074133,"sku":"96501840","price":1223.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501840-llave-dinamometrica-electromecanica-ferrotecnia-9995778.png?v=1773166345"},{"product_id":"stahlwille-96501740-llave-dinamometrica-manoskop-r-730d-40-400n-m-14-x-18-mm-l-688mm","title":"Stahlwille 96501740 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable plug-in tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eSize: 40\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 40-400 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 30-300 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 360-3600 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 40 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 400 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 688 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 23 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/0.1 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e LF: 655 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 25 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3300 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 5155 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568135139669,"sku":"96501740","price":1060.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501740-llave-dinamometrica-electromecanica-ferrotecnia-7098818.png?v=1773165619"},{"product_id":"stahlwille-96500940-llave-dinamometrica-de-angulo-y-par-manoskop-r-714-40-400n-m-14-x-18-mm-l-687mm","title":"Stahlwille 96500940 - Electromechanical torque wrench 40-400 Nm","description":"\u003cp\u003e 4 measurement modes (tightening torque, tightening angle, tightening torque with tightening angle control magnitude, tightening angle with tightening torque control magnitude)\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 400\u003c\/p\u003e\n\n\u003cp\u003e N\u003c\/p\u003e\n\n\u003cp\u003e N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eElectromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Easy documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n\u003cli\u003e Thanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003e4 measurement modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) High-resolution color OLED display and side indicator lights Visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) Configurable display structure Quarter-turn locking battery cover Optional: lithium-ion battery no. 7195-2 and charger no. 71603 operating modes: click (patented electromechanical trigger), peak hold (peak value display mode) and tracking (real-time value display mode) Micro USB interface for data communication Optional Bluetooth Low Energy module (5.2) QuickRelease safety lock: insertable tool change system Data storage of up to 2500 Tightening, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 different sequences; adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of overload of the torque wrench and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and turning angle) to reduce human error; units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n   \u003cli\u003eAutomatic compensation for inserted tool length: the inserted tool length can be entered to ensure the required target value is correctly achieved by compensating for lever extension. Ready for retightening immediately after releasing the previous screw. Clockwise and counterclockwise tightening: the inserted tool must be turned over to apply the counterclockwise tightening torque in \"trigger\" mode. Visual, acoustic, and tactile activation signal. Tightening torque and turning angle visible simultaneously. Correct measurement regardless of the force application point (for sizes 1, 2, and 4). Safe handling thanks to the ergonomic two-component handle (resistant to most common oils, greases, fuels, brake fluids, and Skydrol). Three certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2). Robust plastic case (sizes 40-100 in sheet metal case). (steel) registered design, patented with SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 V; rotation angle indication resolution 0.1°; rotation angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/li\u003e \n\u003cli\u003em: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 1\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 40\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 40-400 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 30-300 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 360-3600 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 687 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 23 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 656 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 25 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 1765 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 5155 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 4.93 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568135336277,"sku":"96500940","price":2108.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96500940-llave-dinamometrica-electromecanica-40-400-nm-ferrotecnia-9087468.png?v=1773165858"},{"product_id":"stahlwille-96501765-llave-dinamometrica-manoskop-r-730d-65-650n-m-14-x-18-mm-l-870mm","title":"Stahlwille 96501765 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable plug-in tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eSize: 65\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 14 x 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 65-650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 48-480 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 580-5800 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 65 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 650 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 870 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/0.1 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e LF: 837 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 25 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 3300 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 6000 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 6 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568135369045,"sku":"96501765","price":1308.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501765-llave-dinamometrica-electromecanica-ferrotecnia-3803360.png?v=1773166395"},{"product_id":"stahlwille-50450080-llave-dinamometrica-71ar-80-160-800n-m-3-4-l-1152mm","title":"Stahlwille 50450080 - Torque wrench 71aR\/80 160-800N·m 3\/4\" L. 1152mm","description":"\u003cp\u003e direct reading\u003c\/p\u003e\n\n\u003cp\u003e special bright yellow lead for clear identification of the indication\u003c\/p\u003e\n\n\u003cp\u003e n even in poor visibility Protection\u003c\/p\u003e\n\n \u003cp\u003edial indicator with additional protective ring. Handle with compensation mechanism.\u003c\/p\u003e\n\n\u003cp\u003e Integrated force sensor. Not suitable for left-handed measurements. Calibration\u003c\/p\u003e\n\n\u003cp\u003e n with calibration device\u003c\/p\u003e\n\n\u003cp\u003e n perfectControl no. 7794 or calibration device\u003c\/p\u003e\n\n\u003cp\u003e n no.\u003c\/p\u003e\n\n\u003cp\u003e 7706. If necessary, readjustment without disassembly with certificate, delivered in a textile bag, deviation\u003c\/p\u003e\n\n\u003cp\u003e n of indication\u003c\/p\u003e\n\n\u003cp\u003e n ±\u003c\/p\u003e\n\n\u003cp\u003e 4%\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e dual scale drag dial indicator Nm\/ft-lb luminescent scale sheet\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 160-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 100-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 10 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 10 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1152 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 70 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 30 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 1060 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4900 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 4.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568140382549,"sku":"50450080","price":1755.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50450080-llave-dinamometrica-71ar80-160-800nm-34-l-1152mm-ferrotecnia-5244019.png?v=1773165255"},{"product_id":"stahlwille-50181100-llave-dinamometrica-manoskop-730n-200-1000n-m-22-x-28-mm-l-1363mm","title":"Stahlwille 50181100 - MANOSKOP 730N Torque Wrench 200-1000N·m 22 x 28 mm L. 1363mm","description":"\u003cp\u003e Housing for interchangeable insertion tools\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e housing for interchangeable snap-on tools, QuickRelease safety lock, tighten to the left by reversing the snap-on tools, deviation in indication ± 3% (size 2, a\/2 ± 4%)\u003c\/li\u003e\n\n\u003cli\u003e Size: 100\u003c\/li\u003e\n\n   \u003cli\u003eTool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 200-1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 150-750 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 200 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 25 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1363 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 1352 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 5000 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568145494357,"sku":"50181100","price":1798.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50181100-llave-dinamometrica-manoskop-730n-200-1000nm-22-x-28-mm-l-1363mm-ferrotecnia-9375396.png?v=1773165908"},{"product_id":"stahlwille-96502100-llave-dinamometrica-manoskop-r-730d-100-1000n-m-22-x-28-mm-l-1344mm","title":"Stahlwille 96502100 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable plug-in tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eSize: 100\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 100-1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 74-750 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 900-9000 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1344 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/1.0 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/1.0 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e LF: 1341 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4995 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 11000 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 11 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568149000533,"sku":"96502100","price":2593.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96502100-llave-dinamometrica-electromecanica-ferrotecnia-6294857.png?v=1773165916"},{"product_id":"stahlwille-96503100-llave-dinamometrica-manoskop-r-730-fix-200-1000n-m-22-x-28-mm-l-1363mm","title":"Stahlwille 96503100 - Torque wrench with disconnect mechanism","description":"\u003cp\u003e for work in mass production\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eIt is not necessary to set the trigger to \"0\", since the measuring element is only subjected to stress during the tightening process. Housing for interchangeable attachable tools. QuickRelease safety lock. Quick and precise adjustment via QuickSelect. Double stop indicator. Double graduation scale, easily readable with different colors for N.\u003c\/li\u003e\n\n\u003cli\u003e m\/ft\u003c\/li\u003e\n\n\u003cli\u003e lb or ft\u003c\/li\u003e\n\n\u003cli\u003e lb\/in\u003c\/li\u003e\n\n   \u003cli\u003elb Tighten to the left by reversing the attachable tools. Overloads acting after the trigger or loads in the opposite direction to the tightening – e.g., when forcing seized screws – have no effect on the trigger mechanism, thus preventing its deterioration. Two-component handle with ergonomic soft green zone (resistant to oils, greases, fuels, brake fluid, and skydrol hydraulic fluid). Calibration with perfectControl® calibration kit no. 7794 or calibration kit no. 7706. If necessary, readjust without removing the wrench. Certified according to DIN EN ISO 6789-2:2017. Registered design in a durable synthetic case (size 80-100 in a sheet steel case). Indication deviation ± 3%.\u003c\/li\u003e\n\n\u003cli\u003e Size: 100\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 200-1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 150-750 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 200 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n   \u003cli\u003eNominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 1000 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 100 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft scale division\u003c\/li\u003e\n\n\u003cli\u003e lb: 25 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Fine graduation: 5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1363 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 1352 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 5196 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 11000 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 11 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568149066069,"sku":"96503100","price":2131.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96503100-llave-dinamometrica-con-mecanismo-de-desconexion-ferrotecnia-2170330.png?v=1773165674"},{"product_id":"stahlwille-96502080-llave-dinamometrica-manoskop-r-730d-80-800n-m-22-x-28-mm-l-1160mm","title":"Stahlwille 96502080 - Electromechanical Torque Wrench","description":"\u003cp\u003e A gunshot signal that can be felt and heard\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003ePerceptible and audible trigger signal. Socket for interchangeable plug-in tools. Quick Release. Safety lock; quick adjustment via practical keypad; automatic torque correction after entering an incorrect stitch size; overload protection via audible and visual warning signals; no unintentional adjustment thanks to automatic key lock; display function also for counterclockwise tightening torques; measuring units: Nm, ft-lb, in-lb; different tolerance limits can be set depending on the tightening situation; visual evaluation of the tightening situation via green and red display indication; additional security of presets (function mode, trigger or nominal value, measuring unit, tolerance value, storage, deviation gauge) via PIN code; storage of up to 7,500 tightening data points; USB interface; automatic indication of the next calibration date; calibration with perfectControl® calibration device no. 7794 or calibration system no. 7706; 2-component handle with comfortable green soft grip (resistant to oils, greases, fuels, brake fluids) and Skydrol)Certified according to DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a steel sheet case)PatentedSupplied with 2 x 1.5V Mignon batteries. Rechargeable Mignon NiMH AA\/LR6, 1.2V batteries can be used.Display deviation ± 2%, ± 1 digit.\u003c\/li\u003e \n\u003cli\u003eSize: 80\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 80-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 60-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 720-7200 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 80 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1160 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Mignon (AA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e N adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e m: 1.0\/1.0 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e ft adjustment indicator resolution\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0\/1.0 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Adjusting the indicator resolution in\u003c\/li\u003e\n\n\u003cli\u003e lb: 10\/1.0 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e LF: 1157 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4577 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 10500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 10.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568149098837,"sku":"96502080","price":2117.3,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96502080-llave-dinamometrica-electromecanica-ferrotecnia-6961638.png?v=1773165915"},{"product_id":"stahlwille-96501080-llave-dinamometrica-de-angulo-y-par-manoskop-r-714r-80-800n-m-3-4-l-1253mm","title":"Stahlwille 96501080 - Electromechanical torque wrench 80-800 Nm","description":"\u003cp\u003e Torque and angle wrench for bolted joints with torque warning, tightening angle warning, torque warning with angle control and tightening angle warning with torque control.\u003c\/p\u003e\n\n \u003cp\u003eTo tighten counterclockwise in \"trigger\" mode, the inserted tool must be turned over (sizes 80-100) Visual, acoustic and tactile activation signal Tightening torque and turning angle visible at the same time Correct measurement regardless of the point of force application (for sizes 1, 2 and 4) Safe handling thanks to the ergonomic two-component handle (resistant\u003c\/p\u003e\n\n\u003cp\u003e to the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2)in robust plastic case (sizes 40-100 in sheet steel case)registered, patented designwith SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 Vturning angle indication resolution 0.1°turning angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n \u003ch3\u003eCharacteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Easy documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n\u003cli\u003e Thanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003ewith reversible ratchet (size 1-4), fine-tooth reversible ratchet (size 6-65) or through-square ratchet adapter (size 80-100) 4 measuring modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) high-resolution color OLED display and side indicator lights visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) configurable display structure quarter-turn locking battery cover optionally: lithium-ion battery no. 7195-2 and charger no. 7160 3 operating modes: click (patented electromechanical trigger), peak hold (peak display mode) and tracking (peak display mode real-time) micro USB interface for data communication; optional Bluetooth Low Energy (5.2) module; QuickRelease safety lock: insertable tool change system; data storage for up to 2500 tightening operations, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 sequences; different adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of torque wrench overload and forced triggering in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and angle) (rotation) to reduce human error. Units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n\u003cli\u003e Automatic compensation of inserted tool length: possibility of entering the length of the inserted tool to ensure that the required target value is correctly reached by compensating for the lever extension; ready for a new tightening immediately after releasing the previous screw; for controlled clockwise and counterclockwise tightening (sizes 1-65)\u003c\/li\u003e\n\n\u003cli\u003e m: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 80\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 80-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 60-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 720-7200 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 3\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1253 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 130 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 95 mm\u003c\/li\u003e\n\n\u003cli\u003e Number of teeth: 30\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 6487 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 12300 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 5.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568150114645,"sku":"96501080","price":3357.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96501080-llave-dinamometrica-electromecanica-80-800-nm-ferrotecnia-7361917.png?v=1773165805"},{"product_id":"stahlwille-96500980-llave-dinamometrica-de-angulo-y-par-manoskop-r-714-80-800n-m-22-x-28-mm-l-1158mm","title":"Stahlwille 96500980 - Electromechanical torque wrench 80-800 Nm","description":"\u003cp\u003e 4 measurement modes (tightening torque, tightening angle, tightening torque with tightening angle control magnitude, tightening angle with tightening torque control magnitude)\u003c\/p\u003e\n\n\u003cp\u003e 100° at least 1%, ± 1 digit tightening torque resolution ≤ 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 60 N\u003c\/p\u003e\n\n\u003cp\u003e \u0026gt;\u003c\/p\u003e\n\n\u003cp\u003e 400\u003c\/p\u003e\n\n\u003cp\u003e N\u003c\/p\u003e\n\n\u003cp\u003e N\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Electromechanical direct reading (with electronic measurement) and triggering (with the familiar mechanical \"click\").\u003c\/li\u003e\n\n\u003cli\u003e Visual evaluation of the bolted joint.\u003c\/li\u003e\n\n\u003cli\u003e Easy documentation of measurement values ​​on the PC via the USB interface and via an optional Bluetooth Low Energy module.\u003c\/li\u003e\n\n\u003cli\u003e Thanks to the combination of the patented electromechanical trigger, direct reading and acoustic response, the key provides a warning with maximum optimization.\u003c\/li\u003e\n\n   \u003cli\u003e4 measurement modes (tightening torque, tightening angle, tightening torque with \"tightening angle\" control, tightening angle with \"tightening torque\" control) High-resolution color OLED display and side indicator lights Visual evaluation of the bolted joint: yellow light (warning threshold reached), green light (within target range), red light (measurement outside tolerance range) Configurable display structure Quarter-turn locking battery cover Optional: lithium-ion battery no. 7195-2 and charger no. 71603 operating modes: click (patented electromechanical trigger), peak hold (peak value display mode) and tracking (real-time value display mode) Micro USB interface for data communication Optional Bluetooth Low Energy module (5.2) QuickRelease safety lock: insertable tool change system Data storage of up to 2500 Tightening, including date and time; up to 200 threaded connections can be programmed in a maximum of 25 different sequences; adjustable tolerance limits depending on the tightening type; acoustic and visual evaluation of the tightening; quick and precise adjustment via the push-button panel; no unintentional adjustments thanks to the password-protected push-button panel lock; acoustic and visual warning signal in case of overload of the torque wrench and forced firing in clockwise tightening; automatic notification of the next calibration date, configurable by the user according to the elapsed time and\/or the number of operations; fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (tightening torque) or 7794-3 (tightening torque and turning angle) to reduce human error; units of measurement: N\u003c\/li\u003e \n\u003cli\u003em, ft\u003c\/li\u003e\n\n\u003cli\u003e lb, in\u003c\/li\u003e\n\n   \u003cli\u003eAutomatic compensation for inserted tool length: the inserted tool length can be entered to ensure the required target value is correctly achieved by compensating for lever extension. Ready for retightening immediately after releasing the previous screw. Clockwise and counterclockwise tightening: the inserted tool must be turned over to apply the counterclockwise tightening torque in \"trigger\" mode. Visual, acoustic, and tactile activation signal. Tightening torque and turning angle visible simultaneously. Correct measurement regardless of the force application point (for sizes 1, 2, and 4). Safe handling thanks to the ergonomic two-component handle (resistant to most common oils, greases, fuels, brake fluids, and Skydrol). Three certificates included (direct reading and triggering of tightening torque according to DIN EN ISO 6789-2:2017 and turning angle according to VDI\/VDE 2648-2). Robust plastic case (sizes 40-100 in sheet metal case). (steel) registered design, patented with SensoMaster 4 software, USB cable, 4 AAA\/LR03 micro batteries, 1.5 V; rotation angle indication resolution 0.1°; rotation angle indication deviation ±1°, ±1 digit up to 100°, \u0026gt;\u003c\/li\u003e \n\u003cli\u003em: 0.01 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 0.1 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e m: 1\u003c\/li\u003e\n\n\u003cli\u003e Torque indication deviation ± 2%, ± 1 digit\u003c\/li\u003e\n\n\u003cli\u003e Size: 80\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 22 x 28 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 80-800 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 60-600 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 720-7200 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 1158 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 30.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 25.6 mm\u003c\/li\u003e\n\n\u003cli\u003e Battery type: Micro (AAA) 1.5V\u003c\/li\u003e\n\n\u003cli\u003e DIN: DIN EN ISO 6789-2:2017\u003c\/li\u003e\n\n\u003cli\u003e LF: 1158 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 55 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 4572 g\u003c\/li\u003e\n\n\u003cli\u003e Weight with box: 10400 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 10.4 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568150147413,"sku":"96500980","price":2756.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-96500980-llave-dinamometrica-electromecanica-80-800-nm-ferrotecnia-7574153.png?v=1773165428"},{"product_id":"stahlwille-50100001-llave-dinamometrica-manoskop-r-755r-1-1-5-12-5n-m-1-4-l-173-5mm","title":"Stahlwille 50100001 - MANOSKOP® 755R\/1 Torque Wrench 1.5-12.5N·m 1\/4\" L. 173.5mm","description":"\u003cp\u003e independent measurement of the point of force application\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 1.5-12.5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Measurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 1.0-9.0 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 1.5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 12.5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Outside outlet square (inch): 1\/4\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 173.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 22 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 18 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 335 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.34 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568151556437,"sku":"50100001","price":293.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50100001-llave-dinamometrica-manoskop-755r1-15-125nm-14-l-1735mm-ferrotecnia-5391434.png?v=1773166157"},{"product_id":"stahlwille-50184001-llave-dinamometrica-manoskop-r-730-quick-2-10n-m-9-x-12-mm-l-179mm","title":"Stahlwille 50184001 - MANOSKOP® 730 Quick torque wrench 2-10N·m 9 x 12 mm L. 179mm","description":"\u003cp\u003eTrigger; Socket for interchangeable plug-in tools; Quick Release safety lock; Flash adjustment via easy-to-operate clamping lever on the handle; Ergonomic shape, ergonomically shaped, non-slip adjustment element with thumb notch; Spherical handle optimized for fatigue-free work; Double stop signal; No need to reset to \"0\" as the measuring element is only charged during the tightening process; Tighten with the left hand by rotating the plug-in tools; Continued charging after release or charging in the opposite direction to the functional direction, e.g., in the case of stuck screws; e.g., with stuck screws, does not affect the release mechanism, which is thus protected from damage; Calibration with perfectControl calibration device no. 7794 or calibration system no. 7706. If necessary, readjustment without disassembly; With certificate; Deviation indication ± 4%.\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Size: 2-1\u003c\/li\u003e\n\n   \u003cli\u003eTool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 2-10 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 0.25 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 179 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 27.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 23.6 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 157.2 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 17.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 315 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.32 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568152605013,"sku":"50184001","price":434.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50184001-llave-dinamometrica-manoskop-730-quick-2-10nm-9-x-12-mm-l-179mm-ferrotecnia-8231820.png?v=1773165316"},{"product_id":"stahlwille-50184002-llave-dinamometrica-manoskop-r-730-quick-4-20n-m-9-x-12-mm-l-179mm","title":"Stahlwille 50184002 - MANOSKOP® 730 Quick Torque Wrench 4-20N·m 9 x 12 mm L. 179mm","description":"\u003cp\u003e Immediate adjustment thanks to an easy-to-use clamping lever on the handle\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Effective. There is no need to reset to \"0\", as the measuring element is only subjected to stress during the tightening process.\u003c\/li\u003e\n\n\u003cli\u003e Ergonomic, non-slip adjustment element with thumb cavity and optimized ball handle for fatigue-free work\u003c\/li\u003e\n\n\u003cli\u003e Trigger torque wrench with interchangeable insert tool housing, dual stop signal (sensible and audible), tighten to the left by reversing the insert tools\u003c\/li\u003e\n\n\u003cli\u003e With calibration certificate, display deviation of ± 4%\u003c\/li\u003e\n\n   \u003cli\u003eTrigger; Socket for interchangeable plug-in tools; Quick Release safety lock; Flash adjustment via easy-to-operate clamping lever on the handle; Ergonomic shape, ergonomically shaped, non-slip adjustment element with thumb notch; Spherical handle optimized for fatigue-free work; Double stop signal; No need to reset to \"0\" as the measuring element is only charged during the tightening process; Tighten with the left hand by rotating the plug-in tools; Continued charging after release or charging in the opposite direction to the functional direction, e.g., in the case of stuck screws; e.g., with stuck screws, does not affect the release mechanism, which is thus protected from damage; Calibration with perfectControl calibration device no. 7794 or calibration system no. 7706. If necessary, readjustment without disassembly; With certificate; Deviation indication ± 4%.\u003c\/li\u003e\n\n\u003cli\u003e Size: 2\u003c\/li\u003e\n\n   \u003cli\u003eTool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 4-20 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e N scale division\u003c\/li\u003e\n\n\u003cli\u003e m: 0.5 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 179 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 27.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 23.6 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 157.2 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 17.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 315 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.31 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568152736085,"sku":"50184002","price":374.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50184002-llave-dinamometrica-manoskop-730-quick-4-20nm-9-x-12-mm-l-179mm-ferrotecnia-5919473.png?v=1773165131"},{"product_id":"stahlwille-50010004-llave-dinamometrica-manoskop-r-755-4-40n-m-9-x-12-mm-l-201mm","title":"Stahlwille 50010004 - MANOSKOP® 755 Torque Wrench 4-40N·m 9 x 12 mm L. 201mm","description":"\u003cp\u003e with shot\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Trigger; Register for interchangeable plug-in tools (755\/4-30); Double stop signal; Especially light and easy to handle; Handle and shaft made of square steel tubing; Continued loading after triggering or loading in the opposite direction to the operating direction (max. up to the limit of the torque wrench's measuring range) does not affect the release mechanism, which is thus protected against damage; Tightening to the left using plug-in tools that can be repositioned; On request with preset release value (price surcharge of 10%); Adjustment with torque wrench tester; Indication deviation ± 4%.\u003c\/li\u003e\n\n\u003cli\u003e Size: 4\u003c\/li\u003e\n\n\u003cli\u003e Tool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range N\u003c\/li\u003e\n\n\u003cli\u003e m: 4-40 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n   \u003cli\u003eMeasurement range ft\u003c\/li\u003e\n\n\u003cli\u003e lb: 3-30 ft\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e MAN\u003c\/li\u003e\n\n\u003cli\u003e m: 4 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Nominal value N\u003c\/li\u003e\n\n\u003cli\u003e m: 40 N\u003c\/li\u003e\n\n\u003cli\u003e m\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 201 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 22 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 18 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 172 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 17.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 500 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568155980117,"sku":"50010004","price":212.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50010004-llave-dinamometrica-manoskop-755-4-40nm-9-x-12-mm-l-201mm-ferrotecnia-5087581.png?v=1773166149"},{"product_id":"stahlwille-50584001-llave-dinamometrica-manoskop-730a-quick-17-5-87-5in-lb-9-x-12-mm-l-179mm","title":"Stahlwille 50584001 - MANOSKOP 730a Quick torque wrench 17.5-87.5in lb 9 x 12 mm L. 179mm","description":"\u003cp\u003e with shot\u003c\/p\u003e\n\n\u003ch3\u003e Characteristics\u003c\/h3\u003e\n\n\u003cul\u003e\n\n   \u003cli\u003eTrigger; Socket for interchangeable plug-in tools; Quick Release safety lock; Flash adjustment via easy-to-operate clamping lever on the handle; Ergonomic shape, ergonomically shaped, non-slip adjustment element with thumb notch; Spherical handle optimized for fatigue-free work; Double stop signal; No need to reset to \"0\" as the measuring element is only charged during the tightening process; Tighten with the left hand by rotating the plug-in tools; Continued charging after release or charging in the opposite direction to the functional direction, e.g., in the case of stuck screws; e.g., with stuck screws, does not affect the release mechanism, which is thus protected from damage; Calibration with perfectControl calibration device no. 7794 or calibration system no. 7706. If necessary, readjustment without disassembly; With certificate; Deviation indication ± 4%.\u003c\/li\u003e\n\n\u003cli\u003e Size: a\/2-1\u003c\/li\u003e\n\n   \u003cli\u003eTool holder size [inner square]: 9 x 12 mm\u003c\/li\u003e\n\n\u003cli\u003e Measurement range in\u003c\/li\u003e\n\n\u003cli\u003e lb: 17.5-87.5 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Scale division in\u003c\/li\u003e\n\n\u003cli\u003e lb: 2.5 in\u003c\/li\u003e\n\n\u003cli\u003e lb\u003c\/li\u003e\n\n\u003cli\u003e Length mm (L): 179 mm\u003c\/li\u003e\n\n\u003cli\u003e Width mm (b): 27.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Height mm (h): 23.6 mm\u003c\/li\u003e\n\n\u003cli\u003e LF: 157.2 mm\u003c\/li\u003e\n\n\u003cli\u003e SF: 17.5 mm\u003c\/li\u003e\n\n\u003cli\u003e Weight (g): 315 g\u003c\/li\u003e\n\n\u003cli\u003e Weight in kg: 0.4 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Stahlwille","offers":[{"title":"Default Title","offer_id":52568161026389,"sku":"50584001","price":433.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/files\/stahlwille-50584001-llave-dinamometrica-manoskop-730a-quick-175-875in-lb-9-x-12-mm-l-179mm-ferrotecnia-5541941.png?v=1773165204"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/5593\/8238\/collections\/stahlwille-herramientas-dinamometricas-4734517.jpg?v=1776346335","url":"https:\/\/ferrotecnia.com\/en-ei\/collections\/stahlwille-herramientas-dinamometricas.oembed?page=2","provider":"Ferrotecnia","version":"1.0","type":"link"}